伺服電子壓力機BSW08S-5T

設 備 名 稱：BSW08-500KG系列準確伺服壓力機
Equipment name: BSW08-500KG electronic press

    外 形 尺 寸： 620X755X2000mm(長X寬X高)

Dimensions: 620X755X2000mm (length X width X height)

設 備 重 量： 約350kg

Equipment weight: about 350kg

設 備 功 率： 0.75KW  (Equipment Power: 0.75KW)

工 作 電 壓： 單相AC220V，50HZ

Wong voltage: single phase AC220V, 50HZ

環 境 溫 度： 0—40^OC

Environmental temperature: 0-40OC

 壓 力： 500kgf       

Maximum pressure: 500kgf

壓力使用范圍： 30-500kgf

Pressure range: 30-500kgf

壓力設定單位： 1Kgf

Pressure setting unit: 1Kgf

 行 程：  200mm

Maximum travel: 200mm

位移重復精度：?0.01mm

Displacement repeatability: ?0.01mm

壓 裝 速 度：  0.1-35mm/s

Pressing speed: 0.1-35mm/s

快 進 速 度：  10-100mm/s

Fast forward speed: 10-100mm/s

保 壓 時 間：  0-99S

Pressure holding time: 0-99S

壓力重復精度： ?1%

Pressure repeatability: ?1%

    壓裝模式：Operating mode:

1. 恒定壓裝速度，設定位置停止；

   Constant press speed, set the exact position to stop;

2. 恒定壓裝速度，設定壓力停止；

   Constant press speed, set precise pressure stop;

3. 恒定壓裝速度，設定位移停止；

   Constant press speed, set precise displacement stop;

   質量判定功能：Quality judgment function:

   在線質量檢測功能，確保產品質量；多5個檢測取樣點，可在一定范圍內可自由設定。

   Online quality inspection function ensures product quality; up to 5 detection sampling points can be set freely within a certain range.

    

   參數報表儲存功能：Parameter report storage function:

   通過USB接口連接,壓裝作業數據結果能有序的儲存在U盤。以確保產品數據的可追溯性，有效控制生產質量。

   Through the USB interface connection, the results of the press-fit operation data can be stored in the U disk in an orderly manner. To ensure traceability of product data, effective cool of production quality.

   觸摸式控制屏：Touch cool screen:

   選用大屏幕高彩液晶觸摸屏及組態軟件的無缺配合，提供了友好的人機對話功能。The perfect combination of large-screen high-color LCD touch screen and configuration software provides friendly human-machine dialogue.

   自診斷功能：Self-diagnosis function:

   設備發生故障，電子壓力機能顯示錯誤信息，并提示解決方案，方便很快找出問題并解決。If the equipment fails, the electronic press can display an error message and prompt the solution to quickly find the problem and solve it.

   多功能1/O通迅接口：Multi-function 1/O communication interface:

   通過該接口可以與外部設備通訊，方便全自動化的整合；

   Through this interface, it can communicate with external devices for convenient and fully automated integration;

   環保、節能、安全：Environmental protection, energy saving and

    

   safety:

   通過交流伺服電機驅動電子壓力能提供潔凈的工作環境。伺服壓裝機和氣壓、液壓設備相比節能80%，為了確保安全，電子壓力機設置了安全防護電路。Driving an electronic pressure through an AC servo motor provides a clean wong environment. The servo press is 80% energy efficient compared to pneumatic and hydraulic equipment. To ensure safety, the electronic press is equipped with a safety protection circuit.

    

    

1. 該設備機體上有指定吊裝位，請注意設備上部吊裝孔位置；

   The device has a specified lifting position on the body, please pay attention to the position of the lifting hole on the upper part of the device;

   2.接通電源前，請檢查電源電壓以及容量（單相220V?10% ，50Hz，0.75KW）。Before turning on the power, check the power supply voltage and capacity (single phase 220V ? 10%, 50Hz, 0.75KW).

    

    

   	2.2設備調試前的準備Preparation     before equipment commissioning

    

    

    

1. BSW08系列伺服壓力機定位后，通過水平尺調節設備工作臺面處于水平狀態；并進行下列檢查：After the BSW08 series electronic press is positioned, the wong surface of the equipment is leveled by the level gauge; and the following checks are performed:

※ 電氣連接要合乎電氣安裝規范；

Electrical connections must comply with electrical installation specifications;

 ※ 設備接地保持良好；

The equipment grounding is kept good;

※ 按鈕、指示燈功能正常；

The button and indicator light function normally.

 ※ 設備接通、斷開動作可靠；

The device is connected and disconnected reliably;

  ※ 緊固件無松動；The fastener is not loose;

2. 設備準備狀態：Equipment preparation status:

A．順時針轉動旋開緊停按鈕；

Turn clockwise to open the stop button;

B．將設備側邊的總電源斷路器和電箱內的可控制電源開關置于ON狀態；

Put the main power circuit breaker on the side of the equipment and the coollable power switch in the electric box to the ON state;

C. 點壓操作面板上的“系統開啟”按鈕，接通電源；

Press the “System On” button on the operation panel to turn on the power;

D．電源指示燈亮，此時設備即進入工作準備狀態；

The power indicator is on, and the device is ready for work.

啟動按鈕start up button

A：雙手觸發啟動（半自動模式）

Trigger start with both hands (semi-automatic mode)

為確保操作者的人身安全，本設備將啟動設備設置為雙手觸發啟動模式，在0.3秒時間內雙手同時按下啟動按鈕，壓裝機自動啟動并完成一個工作循環；

In order to ensure the operator's personal safety, the device sets the startup device to the two-hand trigger start mode, and presses the start button simultaneously with both hands within 0.3 seconds, the press machine automatically starts and completes a work cycle;

     B：寸動啟動（手動模式）

     進入?yún)��?shù)設置窗口，點動“手動下”按鈕，壓力頭向下寸動，點動“手動上”按鈕，壓力頭向上寸動。

B: Inching start (manual mode)

緊急停止  emergency stop

在任何狀態下(設置狀態除外)作為緊急停止用,在發生緊急情況下,按下急停按鈕,設備將處于暫停狀態,設備無法進入下一步動作,只有人工逆時針旋轉按鈕,讓按鈕釋放后才能正常運行

In any state (except the setting state) as an emergency stop, in the event of an emergency, press the emergency stop button, the device will be in the pause state, the device can not enter the next action, only the manual counterclockwise rotation button, let the button release In order to run normally

系統啟動System startup

   當外部電源接通（總開關閉合）后，點壓該按鈕，設備控制系統電源接通。長時間不使用該設備時，請務必切斷主回路電源開關（斷路器總開關）

When the external power is turned on (the main switch is closed), press the button and the device cool system is powered on. When not using the device for a long time, be sure to turn off the main circuit power switch (circuit breaker main switch)

復位開關   Reset switch

設備在運行過程中若點壓此設備，設備將慢速?gòu)?fù)位至工作原點。

If the device is pressed during operation, the device will be slowly reset to the wong origin.

三 色 燈   Three-color light

實時顯示設備當前工作狀態

Real-time display of the current wong status of the device

1. 綠燈閃亮：  工作中

   The green light is shining: at work

2. 黃燈閃亮：  待機中

   Yellow light flashes: Standby

   3. 紅燈閃亮： 異常啟動緊急信號

   Red light flashes: abnormal alarm

   蜂 鳴 器  Buzzer

   設備在運行中發生異常情況下，蜂鳴器會發出“嗶！嗶！嗶！”短促的提示音When the device is abnormal during operation, the buzzer will sound “bi! bi! bi!”

    

   USB插槽   USB slot

   將U盤插入U(xiǎn)SB插槽可導出觸摸屏內所有的壓裝數據。

   Insert the USB flash drive into the USB slot to export all the press-fit data in the touch screen.

      I/O接口（選配）I/O interface (optional)

   與外部設備或夾具裝置聯機使用

   Online use with external equipment or fixtures

      觸 摸 屏   touch screen

   觸摸式組態功能顯示屏，進行系統和程序參數設置，顯示當前設備狀態等功能Touch configuration function display, system and program parameter setting, display current device status and other functions

    

    

    

   	3.2  操作前準備Preparation     before operation

    

    

3.2.1  周邊檢查Peripheral inspection

 開機前，檢查壓力推桿下端有效行程內是否有障礙物。

Before starting the machine, check if there are any obstacles in the effective stroke of the lower end of the pressure push rod.

3.2.2  接通電源  Power on

接通外部電源，將外置斷路器與電箱內斷路器置于ON狀態。

Turn on the external power supply and turn the external circuit breaker and the circuit breaker inside the electrical box to the ON state.

3.2.3  系統開啟System open

按下“系統啟動”按鈕，此時電源接通，系統開啟。

Press the “System Start” button, the power is turned on and the system is turned on.

3.2.4  設備復位  Device reset

進入操作系統后，按下畫面中的“點擊進入”，設備即進入初始化狀態中，電缸慢速?gòu)?fù)位至出廠原點位置。

After entering the operating system, press “click to enter” in the screen, the device will enter the initialization state, and the electric cylinder will be slowly reset to the factory origin position.

1.   運  行  Running

   初始化完成后，設備進入待機狀態；設定好相關生產參數，按下雙“啟動按鈕”，設備即進入運行狀態

   After the initialization is completed, the device enters the standby state; set the relevant production parameters, press the double "start button", the device enters the running state