供應變形鋁合金板材固熔爐時效爐生產線（T4&T5)

本生產線是對A6061變形鋁合金板材進行開卷固溶、清洗、矯平、時效等工序，從而得到穩定均勻的熱處理質量和良好外觀為目的。
板材的規格范圍：厚度：4mm～140mm；寬度：900～1600mm；長度：7000mm；板材重量約4.31噸（鋁合金6061的密度為2.75g/cm³）
生產線的生產能力為1000噸/月以上。

本生產線的特點：
1.采用單導環滾底式運送方式，簡單可靠，便于維修，并徹底解除了熱膨脹帶來的影響。工件從溶體化爐處理完了到完全浸入水中時間少于15秒，確保產品質量；
2.采用熱風循環方式，提高了傳熱效率及爐氣溫度的均勻性，爐內工件實體溫差精度可控制在±5℃以內；
3.采用PID-OFF控制方式，升溫均勻，節能效果好；
4.爐體采用夾層結構，中間襯入絕熱纖維，并在纖維層間夾入鋁箔。從而大大提高了爐體氣密性，并減少了散熱損失；

5.充分利用排煙余熱，將溶體化爐排煙導入時效爐內，從而可使時效爐大幅節能；
6.可處理鋁合金各種型號、規格、尺寸的板材：輪轂、活塞、氣缸蓋、進氣歧管、泵體等鋁合金部件，并可具有除砂功能；
7.本生產線自動化程度高，大大降低了人力成本�？刂凭�度高，保證產品質量；設備穩定可靠，實現一條自動化的生線線。          aluminum alloy material, clean, open book solid solution the wong procedure such as, aging, and get a stable uniform heat treatment quality and good appearance for the purpose.
The specifications of the plank range: thickness: 4 mm to 140 mm; Width: 900 ~ 1600 mm; Maximum length: 7000 mm; The biggest about 4.31 tons of weight plate (aluminum alloy 6061 density of 2.75 g/cm&sup 3;)
Production line production capacity is 1000 tons/month or more.

This production line features:
1. The single guide ring rolling bottom type shipping method, simple, reliable and convenient in maintenance, and thoroughly remove the effects of the thermal expansion. The work-piece from the furnace finished to deal with nefi Bohemia completely submerged in water less than 15 seconds, in order to ensure the product quality;
2. The way hot air circulation, improve the heat transfer efficiency and furnace temperature degrees uniformity, the furnace temperature precision workpiece entity can be coolled in & plusmn; Within 5 ℃;
3. Using PID cool mode-OFF, temperature uniformity, good effect in energy saving;
4. The sandwich structure of furnace, the middle line into the adiabatic fiber, and in fiber layer sandwiched between the aluminum foil. Which greatly improve the furnace air tightness and reduce the heat loss;

5. Make full use of smoke waste heat, will be the ioduction stoker nefi Bohemia smoke in the aging furnace, which can make the aging furnace greatly energy saving;
6. It can deal with aluminium alloy of all types and sizes of plank: the wheel hub, the piston, the cylinder, the intake manifold, the pump body and aluminum alloy parts, and have in addition to sand function;
7. This production line is a high degree of automation, and greatly reduce the manpower cost. High cool accuracy, to guarantee the quality of the product; Equipment is stable and reliable, and realize an automatic production line.