廠家直銷壓鑄模溫機導熱油電加熱油爐

The mould temperature machine consists of media box, heating cooling system, power transmission system, liquid level cool system and temperature sensor, injection port and so on. Normally, the pump to make hot fluid in the power transmission system from medium box has a built-in heater and cooler to mould, again from the mold back to medium tank; The temperature sensor measures the temperature of the hot fluid and transfers the data to the cooller part of the cool. The cooller regulates the temperature of the hot fluid, which indirectly adjusts the temperature of the mold. If in production mold temperature machine, mould temperature more than set value of the cooller, the cooller will open the solenoid valve connected to feed line, until the temperature of the heat transfer fluid, namely the temperature of the mold back to the set value. If the die temperature is below the set point, the cooller will turn on the heater.

蘇州邁浦特O系列高溫模溫機特點：

1、運油式模溫機較高使用溫度320℃

2、自動開機排氣

3、自動冷卻關機

4、出油、回油溫度顯示

5、模具回水功能

6、微電腦觸摸式控制操作簡單

7、OMRON、FUJI、TE控制零件

8、不銹鋼管路，減少管阻及銹垢

9、故障顯示，維修不用專業人員

安全保護裝置

 

1、溫度異常 循環油溫度超過上限值切斷主電源

2、電源逆相 電源相位檢測防止泵浦反轉并啟動緊急信號指示

3、泵浦過載 熱繼電器保護泵浦過載并啟動緊急信號指示

4、缺油保護 油槽根據液位開關檢測油位防止缺油并啟動緊急信號指示

5、異常加熱 接觸器卡死異常加熱啟動緊急信號并指示

6、管道堵塞 BY-PASS泄壓回路保護泵浦

7、壓力異常 系統壓力異常自動停止加熱動作

8、排氣功能 設備運行120度時，自動停加熱計時排氣功能

9、短路-超溫 空氣開關-脫扣

基本參數如下表：

溫控范圍	℃	常溫-300℃
cool range		Nomnal temperature-300℃
溫度精度	℃	PID±1℃
Temp cool accuracy
電源		AC3 ∮ 380V 50HZ（3Phase+Earth）
Power
傳熱媒體		導熱油 Oil
Heat trans fer medium
冷卻方式		間接冷卻 Indirect Cooling
Cooling me thod
膨脹箱容量	L	35	35	40	40	75	75	100
Expanxion Tank Capadty
加熱能量	KW	20	30	50	60	75	100	150
Heating capacity
泵浦馬力	HP	1.5	2.2	3	4	5.5	7.5	11
Pump power
泵浦工作流量	L/min	8	10	12.5	16	12.5(18)	25(30)	12.5(18)
Pump folw
系統工作壓力	kg/cm3	2.2	2.8	3	3.2	5.0(4.0)	5.0(4.8)	8.0(7.0)
System pressure
非常大電力消耗	KW	23	33	53	64	73	108	161
Max power supply
警報功能	缺相/缺油/超溫/過載/溢油/加熱異常啟動緊急信號/脫口斷電/泵反轉
Alert func tion	Pump Reversal/Oil Shortage/overtemperature/Overload/Oil Overflow/Overheating/Power outages/reverse
冷卻水配管	INCH	1/2"	1/2"	1/2"	3/4"
Cooling water pipe
循環油配管	INCH	1	1	1-1/4	1-1/4	1-1/2	2	2.5
Ctrculation Oil pipe