UN系列鋁板電阻對焊機

UN1系列電阻對焊機

UN1 Series Resistance Butt Welding Machine

 

電阻對焊機的主要焊接工藝及相對優點：

 

1.電阻對焊機是將兩工件端面始終壓緊，利用電阻熱將接觸部分加熱至塑性狀態，然后迅速施加頂鍛壓力或不加頂鍛壓力只保持焊接壓力，來完成焊接的方法。

2.與閃光對焊相比，電阻對焊操作簡單，價格便宜，焊接效率高。

3.焊接后接頭光滑，毛刺小。

4.結構設計精巧，對精細不一的工件焊接容易調整,專項使用的對焊機控制電路，確保焊接質量。

5.主要用于對焊截面積小于250mm的金屬型材，如鐵線，管材等等。

 

The Main Principle of Resistance Butt Welder and Main Advantages:

1.AC Resistance Butt Welding is the welding method that the end surfaces of two parts are pressed tightly,and the resistance heat is used to heat up the surfaces to the plasticized status,then the upsetting force quickly press them together more tight again or without applying the upsetting force pressure,just only hold on the welding pressure to complete the welding.

2.Compared to Flash Butt Welding,Resistance Welding is much easily to for worker use and operate,the cost is much lower,welding productivity is also higher.

3.The welded joint is smooth.and the welding burrs are small.

4. The structure is designed compactly which is very easily to be adjusted to weld different parts. The special butt welding cool circuits ensure the welding quality.

5. Mainly used for butt welding various metal material with welding section area less than 250mm,such as iron,wires,pipes,etc.

 

主要技術參數：

Main Technical Parameter:

 

 

參數 Parameter	額定容量 Rated   Capacity	額定輸入電壓 Rated   Input Voltage	額定頻率 Rated   Frequency	非常大短路電流 Max   Short Current	負載持續率 Rated   Duty Cycle	非常大夾緊力 Max   Clamping Force	非常大頂鍛力 Max   Upsetting Force	冷卻水流量Cooling Water   Required	外形尺寸Over Dimensions   L*W*H	平均重量 average   Weight
型號 Model   No.
UN1-25	25KVA	380V	50/60Hz	11000A	50%	3900N	1500N	150L/H	90*80*120CM	300Kg
UN1-35	35KVA	380V	50/60Hz	15000A	50%	3900N	1500N	150L/H	90*80*120CM	350Kg
UN1-50	50KVA	380V	50/60Hz	19000A	50%	3900N	1500N	150L/H	90*80*120CM	400Kg
UN1-75	75KVA	380V	50/60Hz	23500A	50%	6100N	2500N	200L/H	90*80*120CM	450Kg
UN1-100	100KVA	380V	50/60Hz	26000A	50%	6100N	2500N	200L/H	90*80*120CM	500Kg
UN1-150	150KVA	380V	50/60Hz	31000A	50%	8000N	3900N	300L/H	135*80*160CM	550Kg
UN1-200	200KVA	380V	50/60Hz	35000A	50%	8000N	3900N	300L/H	135*80*160CM	650Kg