鋁板手持式點焊機

DN3系列手持式點焊機

DN3 Series Portable Spot Welding Machine

設備主要特點

1.該設備屬于電阻點凸焊機的一種，由機架結構，焊接變壓器，控制系統，水冷焊接電纜，點焊焊槍等幾部分組成。電氣主回路采用二較管可控硅無觸點開關，電路開關時間迅速，準確。焊接時間可通過控制系統準確調節，焊接重復性與一致性好，維護方便。

 

2.相對于DN系列電阻點凸焊機，具有體積小，重量輕，等特點，焊機、焊槍都可移動,在結構上破除了老式焊機的固定電較臂舊模式。機器下面配有四個滾輪，移動方便，同時使用時不需要氣壓，配有2米長的通水焊接電纜及手持式點焊槍，操作起來特別靈活，方便，選用不同的焊鉗，可以實現手提式鉗式點焊，單面單點點焊等功能。

 

3.焊接范圍一般為0.1mm---4.0mm的低碳鋼，碳鋼，鍍鋅板，不銹鋼等多種金屬，廣泛應用于各種板金，箱體，柜體，鐵質家具，不銹鋼廚房制品，不銹鋼門業制造及鐵絲鋼絲網片漏焊之后的重新補焊等的焊接。

 

Main Application Characteristic

1.The device belongs to one kind of resistance spot projection welding machine, it is composed of the machinery frame structure, welding transformer, cool system, water-cooling welding cable and welding torch, etc. The main electrical circuit adopts the diode thyristor(SCR) contactless switch, to make sure the circuit switch time rapidly, accurately. The cool system can adjust the welding time precisely,welding repeatability and welding consistency are both very good,also easy maintenance.

2.Compare to the DN Series Resistance Spot Welding Machine,DN3 Series Portable Spot Welder has the advantages of small volume, light weight and other characteristics,install four rollers to the machine to make sure it can move conveniently,furthermore no need air pressure to operate it.

By the 2meters length water-cooling welding cable and hand-held spot welding gun,the operation is quite flexible, convenient.Using different welding guns,it can realize portable clamp type spot welding, single spot welding etc.

3.Generally for low carbon steel, steel, galvanized steel, stainless steel and other metal,Its welding range is 0.1mm---4.0mm.

It is widely used in all kinds of sheet metal,steel box and cabinet,iron furniture,stainless steel kitchen products,stainless steel door manufacturing and steel wire mesh reweld for leakage welding etc.

技術參數

Technical Parameter

型號 Model 參數          Parameter	DN3-16K	DN3-25K	DN3-35K	DN3-45K	DN3-50K
額定功率（KVA） Rated Power	16KVA	25KVA	35KVA	45KVA	50KVA
額定輸入電壓（V） Rated Input Voltage	380V-420V,50/60HZ
額定初級電流（A） Rated Primary Current	4高等	70A	8高等
焊接電纜長度（m） Welding Cable Length	2米(可以加長) 2meter or any other special length
非常大焊接厚度（mm） Max Welding Thickness	1.2mm 1.2mm	1.8mm 1.8mm	2.3mm 2.3mm	3.2mm 3.2mm	3.8mm 3.8mm
冷卻方式 Cooling Way	變壓器空冷，二次電纜水冷. Transformer---Air Cooling, Welding Electric Cable---Water Cooling			水冷 Water Cooling
重量（KG） Weight	85KG	95KG	130KG	140KG	150KG

 

 

 

 

 

Model         Parameter	DN3-16K	DN3-25K	DN3-35K	DN3-45K	DN3-50K
Rated Power	16KVA	25KVA	35KVA	45KVA	50KVA
Rated Input Voltage	380V-420V,50/60HZ
Rated Primary Current	4高等	70A	8高等
Welding Cable Length	2meter or any other special length
Max Welding Thickness	1.2mm 1.2mm	1.8mm 1.8mm	2.3mm 2.3mm	3.2mm 3.2mm	3.8mm 3.8mm
Cooling Way	Transformer---Air Cooling, Welding Electric Cable---Water Cooling			Water Cooling
Weight	85KG	95KG	130KG	140KG	150KG