不銹鋼法蘭截止閥口碑較好品牌

進口不銹鋼法蘭截止閥

 

德國巴赫進口不銹鋼法蘭截止閥概述：Overview of stainless steel flanged stop valves imported from Germany by Bach:

進口不銹鋼法蘭截止閥的閥桿軸線與閥座密封面垂直。閥桿開啟或關閉行程相對較短，不銹鋼截止閥具有非常可靠的切斷動作，使得這種閥門非常適合作為介質的切斷或調節及節流使用。Imported stainless steel flange stop valve stem axis and valve seat sealing surface vertical. Valve opening or closing stroke is relatively short, stainless steel stop valve has a very reliable cutting action, so that this valve is very suitable for cutting or regulating medium and throttling use.

進口不銹鋼法蘭截止閥一旦處于開啟狀態，它的閥座和閥瓣密封面之間就不再有接觸，因而它的密封面機械磨損較小，由于大部分不銹鋼截止閥的閥座和閥瓣比較容易修理或更換密封元件時無需把整個閥門從管線上拆下來，這對于閥門和管線焊接成一體的場合是很適用的。介質通過此類閥門時的流動方向發生了變化，因此不銹鋼法蘭截止閥的流動阻力較高于其它閥門。

Stainless steel flanged globe valve

Germany Bach imported stainless steel flange valve overview:

Imported stainless steel flange valve stem axis and valve seat sealing surface vertical. Valve stem to open or close the trip is relatively short, stainless steel valve has a very reliable cutting action, making this valve is very suitable for use as a medium cut or regulation and throttle use.

Imported stainless steel flange once the valve is turned on, there is no contact with its seat and disc sealing surface between the sealing surface mechanical wear small, because there is no need to remove the valve from the pipeline most stainless steel valve seat and valve easily repaired or replaced seals, for this the valves and pipes welded into one of the occasion is appropriate. The flow direction of the medium is changed by the valve, so the flow resistance of the stainless steel flange is higher than that of other valves.
進口不銹鋼法蘭截止閥的定義：Definition of stainless steel flanged stop valve:   

1、不銹鋼截止閥結構比閘閥簡單，制造與維修都較方便。
2、密封面不易磨損及擦傷，密封性好，啟閉時閥瓣與閥體密封面之間無相對滑動，因而磨損與擦傷均不嚴重，密封性能好，使用壽命長。
3、啟閉時，閥瓣行程小，因而截止閥高度比閘閥小，但結構長度比閘閥長。
4、啟閉力矩大、啟閉較費力，啟閉時間校長。
5、流體阻力大，因閥體內介質通道較曲折，流體阻力大，動力消耗大。
6、介質流動方向：公稱壓力PN≤16MPa時，一般采用順流，介質從閥瓣下方向上流；公稱壓力PN≥20MPa時，一般采用逆流，介質從閥瓣上方向下流．以增加密封件能。使用時，截止閥介質只能單方向流動，不能改變流動方向。
7、截止閥全開時閥瓣經常受沖蝕。

The definition of imported stainless steel flange valve:

1, stainless steel gate valve structure than simple, easy to manufacture and maintenance.

2, the sealing surface is not easy to wear and abrasion, good sealing, open and close the valve flap and the valve body sealing surface between the relative sliding, so wear and abrasion are not serious, good sealing performance, long service life.

3, open and close, the valve flap stroke is small, so the valve height than the gate valve is small, but the length of the structure than the gate length.

4, opening and closing torque is large, open and close more laborious, open and close time principal.

5, fluid resistance, due to the valve body in the media channel more twists and turns, fluid resistance, power consumption.

6, medium flow direction: nominal pressure PN is less than 16MPa, generally use the media from the valve downstream, under the direction of flow; nominal pressure PN = 20MPa, using reflux, medium from the valve on the downstream direction to increase the seal. When the utility model is used, the valve can only flow in one direction and can not change the flow direction.

7, the valve is fully open when the valve flap is subject to erosion.

 

進口不銹鋼法蘭截止閥技術參數：Import stainless steel flange stop valve technical parameters:

產品名稱	驅動方式	連接形式	結構形式	密封結構	壓力范圍	公稱通徑	常用材質	產品型號
進口不銹鋼法蘭截止閥	手動	法蘭	閥瓣非平衡式	硬密封	1.6-16.0MPa	DN15-600	304、304L、316、316L	bach-a
閥門尺寸標準	閥門試驗標準	閥門交貨標準	工業閥門標準	法蘭閥門標準	焊接閥門標準	對夾式連接閥	內螺紋連接閥	可以提供美國
DIN EN558-2005	DIN EN12266-1-2003	DIN3230-2-1974	DIN EN 1171-2003	DIN EN 3202-1977	DIN EN 3202-1982	DIN EN 3202-1979	DIN EN 3202-1977	API、ANSI等標準