氣動閘閥歐洲供應商價格

進口氣動閘閥

 

德國巴赫進口氣動閘閥概述：Overview of pneumatic valve imported from Germany Bach:

進口氣動法蘭閘閥是由氣動執行器及手動法蘭閘閥組成。氣動法蘭閘閥由于采用雙層氣缸結構，與單氣缸式氣動閘閥相比，提升力加大了一倍。閥門具備緩沖機構，能有效地減速輕了關閉閥門時，活塞下行沖擊而造成的閥板車密封面和閥體密封面的磨損，也能避免閘板卡死的現象。

Imported pneumatic flange gate valve is composed of pneumatic actuator and manual flange gate valve. Pneumatic flange gate valve uses double cylinder structure, compared with single cylinder type pneumatic gate valve, the lifting force doubled. The valve body with the buffer, can effectively slow light when the valve is closed, the piston valve caused by the impact of a sealing surface and valve sealing surface wear, can also avoid the gate blocking.進口氣動法蘭閘閥可以配用電的或氣的回訊器，用以發送閥門開關狀態信息�？梢詫崿F遠距離控制，集中控制和自動控制。性能可靠、操作切換和維修方便等特點。它廣泛用于自來水、污水、建筑、石油、化工、食品、醫藥、輕紡、電力、船舶、冶金、能源系統等體管線上作為調節和截流裝置使用。

 

 

進口氣動閘閥的定義：Definition of imported pneumatic gate valve:

1、設計合理，密封可靠，通道流暢，流阻系數小。  
2、閘板、閥座密封面用鐵基合金堆焊或司太立（stellite）鈷基硬質合金堆焊而成，耐磨、耐高溫、耐腐蝕、抗擦傷性能好、使用壽命長。 
3、采用楔式彈性閘板或鋼性楔式單閘板結構，中大口徑設置滾動軸承，開關靈活，啟閉輕松。  
4、閥桿經調質及表面氮化處理，有良好的抗腐蝕性，抗擦傷性和耐磨性。  
5、可采用各種配管法蘭標準及法蘭密封面型式，滿足各種工程需要及用戶要求。  
6、閥體材料品種齊全，填料、墊片可根據實際工況或用戶要求合理選配，能適用于各種壓力、溫度及介質工況。  

1, reasonable design, reliable sealing, smooth channel, small flow resistance coefficient.   

Iron based alloy surfacing or Stellite 2, gate and seat sealing surface (Stellite) surfacing cobalt based alloy, wear resistance, high temperature resistance, corrosion resistance, anti abrasion performance and long service life.  

3, the use of wedge type elastic gate or steel wedge type single gate structure, large diameter set rolling bearings, switch flexible, easy to open and close.   

4, the stem through the quenching and tempering and surface nitriding treatment, good corrosion resistance, scratch resistance and wear resistance.   

5, can be used with standard pipe flanges and flange sealing surface, to meet the needs of various projects and user requirements.   

6, the valve body material is complete, packing, gasket can be based on actual conditions or user requirements reasonable matching, can be applied to all kinds of pressure, temperature and medium conditions.

 

進口氣動閘閥技術參數：Technical parameters of imported pneumatic gate valve:

產品名稱	驅動方式	連接形式	結構形式	密封結構	壓力范圍	公稱通徑	常用材質	產品型號
進口氣動閘閥	手動	法蘭	明桿	硬密封	1.0-1.6MPa	DN50-1000	鑄鋼、不銹鋼、鉻鉬鋼	bach-a
閥門尺寸標準	閥門試驗標準	閥門交貨標準	工業閥門標準	法蘭閥門標準	焊接閥門標準	對夾式連接閥	內螺紋連接閥	可以提供美國
DIN EN558-2005	DIN EN12266-1-2003	DIN3230-2-1974	DIN EN 1171-2003	DIN EN 3202-1977	DIN EN 3202-1982	DIN EN 3202-1979	DIN EN 3202-1977	API、ANSI等標準