青島震雄SJ-35塑料擠出機plastic extruder

隨著塑料工程的不斷發展，對產品表面質量及抗老化的要求不斷提高，以及對塑料管材和型材色彩要求的不斷提高，為了滿足客戶的要求，又要考慮制造成本，因此“型材表面共擠涂層”以及管材共擠技術應運而生。SJ-35×25型單螺桿塑料擠出機就是專配于共擠的新產品，本機具有塑化好、質量穩定、制品密實度高、適應范圍廣等特點，配不同的螺桿，可加工RPVC、PMMA、UPVC、PE又可加工橡膠制品。 本機設有自動溫控、風強制冷卻器等裝置，主電機采用交流變頻無級調速。 本機擠出量為10kg/hr-25kg/hr With continuous development of the plastic project, the requirement on the products surface quality, ageing resistance, the color of the plastic tubing and the sectional materials increase continuously. In order to satisfy the demand of the customers as well as considering the cost, the sectional material surface co-extruding coat and tubing co-extruding technique appear. SJ-35×25 type single screw plastic extruder which has the characteristic of good plasticization, steady quality, high dense degree and extensive applicable range is the new products that are specially matched with co-extruding, can process RPVC, PMMA, UPVC, PE and rubber products if it is matched with different screws.